Resin & Epoxy Floor

Epoxy and Polyurethane flooring:

Ice Crystal flooring solution offers epoxy floors as a reliable and durable surface for residential commercial and industrial flooring. Epoxy floor coatings are normally applied over concrete floors to provide a high chemical resistant and heavy traffic performance at the same time smooth and durable surface that can withstand heavy loads. Many industrial buildings, warehouses, food industry and car parking require to have epoxy floors as they need to maintain the floors in perfect and strong conditions.

Where to use:

  • Food Industry
  • Pharmaceutical industry
  • Floors in laboratories
  • Asseptic rooms
  • Industrial floors for medium-heavy traffic
  • Idustial floors for hight-heavy traffic
  • Floors in production areas in food processing plants subject to frequents washing, such as fish and meat processing plants
  • Floor subject to intense traffic pallet trucks and moving vehicles;
  • Homes, showrooms, shops

EPOXY DÉCOR FLOOR: creating floor with a troweled or mottled finish in internal environment  such as homes, showrooms and shops:

EPOXY SYSTEM for Light/Medium traffic and where medium chemical resistant is required such as  store and warehouses:

Benefits and Advantages:

  • Perfectly continuous surfaces with an extremely limited inclusion of joints, to avoid areas where dirt and bacteria may collect:
  • Hight resistance to frequent contact with chemical substances (acids, base chemicals, blood, milk, wine, drinks, in general, etc.):
  • Easy to clean and resistant to frequent washing;
  • Safe, non-slip surfaces, even in the presence of liquids;
  • Resistant to mechanical stress, abrasion and impact caused by the continuous movement of mechanical transport such as fork –lifts and pallet trucks;
  • Surfaces which are totally impermeable to liquids and oils;
  • Surfaces which are resistant to frequent, considerable;

EPOXY SYSTEM for industrial floor where high chemical resistant is required such a food industry, pharmaceutic industry and laboratories:

Epoxy and Polyurethane system for car parks:

For coating road surfaces in indoor and outdoor car parks.


Prepare the substrate by grinding or shot-blasting to guarantee the best performance from the epoxy/polyurethane system. Any defects present on the surface, such as holes, pitting, cracking, etc., must be repaired beforehand.
Spread Primer mixed of Quartz 0.5 on the substrate. Pour the mix on the floor to be coated and spread it out in an even coat with a smooth trowel or smooth rake. Broadcast the surface with Quartz 0.5 while the product is still wet.
Remove excess sand with a vacuum cleaner once Primer has hardened.
Apply an intermediate layer of Epoxy/polyurethane mixed with color Paste  and 30%
by weight of Quartz 0.25. Spread the mix evenly over the previous coat using a notched
trowel. While the mix is still wet, fully sprinkle the surface with an even layer of Quartz 0.5 or 0.3-0.9 mm or 0.7-1.2 mm quartz sand depending on the degree of non-slip finish required (approximately 4-6 kg/m2). When the mix has hardened, remove all excess sand with an industrial vacuum cleaner.
Finish the surface with a coat of Epoxy/polyurethane. Spread the mix evenly with a medium- haired roller or down to a feather edged with a smooth rubber or steel trowel to form a seamless coat. If required, finish off the surface with a short-haired roller, making sure that the roller strokes cross over each other to obtain a more even surface.

Contact us now

We are here

UAE, Dubai, Tecom, Smart Heights,
Office 2006; P.O.Box 391281
Phone: +971 4 277 16 19
             +971 4 277 12 14
Mobile: +971 52 906 56 25
             +971 52 879 71 79

Working hours

8:00 AM to 6:00 PM

Your Name (required)

Your Email (required)


Your Mobile (required)

Your Message